Thermoplastic polyurethane/laponite nanocomposite for reducing impact sound in a floating floor

Abstract

An effective way to reduce impact sound in buildings is to install a floating floor consisting of a floating slab separated from the structural slab by a continuous viscoelastic layer. Although a considerable amount of work has been reported on nanomaterials in the past decades, the impact sound reduction performance of polymer/clay nanocomposites has not been specifically addressed in the literature. In this paper, we report the synthesis and characterization of a nanocomposite made of thermoplastic polyurethane (TPU) with laponite clay filler and its potential use for reducing impact sound in floating floor technology. Samples were prepared with laponite content ranged between 0.5 and 10 wt% for each nanocomposite synthesized using a solvent solution mixing process. The characterization of the nanocomposites confirmed that the clay content in the TPU matrix has significant impact on the viscoelastic properties. In particular, the incorporation of 5–10 wt% laponite clay in the TPU matrix increased mechanical damping and reduced dynamic stiffness as compared to the pristine TPU. The experimental results were compared with a constitutive model that extends the Cremer-Vér model. The results predicted a considerable improvement of the impact sound insulation at the resonance frequency when the nanocomposite is used as a continuous viscoelastic layer supporting the floating slab. These results were attained without significantly increasing the total weight of the floating layer.